Outdoors Emu | Emu Camaleon Fioriera Alta

The Camaleon Collection By Emu Is A Multifunctional And Customizable Modular System Based On Your Furnishing Needs. Camaleon Is Made Up Of Various Superimposable Structures That Allow You To Freely Create Multiple Compositions; In Fact, It Is Possible To Choose Both The Number And The Type Of Individual Elements That Will Create The Various Configurations, Thus Obtaining Planters, Containers, Dividers And Support Surfaces In Metal And Teak. Finally, The Coupling Systems Between The Structures Guarantee Maximum Stability In Any Situation.Technical Data Dimensions L/W/H: 120 / 46 / 140 Cm – Weight 32.10 Kg Planter Box Dimensions L/D/H: 37 / 37 / 23 – Weight 4.4 Kg Static Load: 200 Kg Structure: Painted Aluminum Closure Panels: Painted Steel Planter Modules: Galvanized And Painted Steel Sheet In Dove Gray Color71 – Bottom In Perforated Galvanized Steel Sheet Fixings And Connections: Painted Steel Perforated Sheet Metal Shelf: Perforated Sheet Metal With Full Edge In Galvanized Steel And Painterstop: Sheet Metal And Teak Fixing Accessories There Are 3 Fixing Accessories Available, All Made Of High-Thickness Galvanized Steel Sheet. Ground Fixing: These Are Plates To Be Screwed To The Insoles Of The Modules Equipped With Holes For Screwing The Modules To The Ground. The Single Plate Is Available To Fix The 4 Legs To The Ground Separately. And The Double Plate To Fix The Two Nearby Legs Of 2 Modules Joined On The Short Side To The Ground And To Each Other. Finally, The “Module Connection” Plate Is Used To Fix 2 Modules To Each Other On The Short Side Corresponding To The Lower Crosspieces Of The Base Module. Steel Maintenance_To Keep The Product In Good Condition For A Long Time, We Recommend Storing It During The Winter In Closed And Dry Places In Order To Avoid Condensation. Before The Winter Season And Every Three Months, If The Products Are Stored Near The Sea, It Is Recommended To Clean The Metal Surfaces With A Soft Cloth Using Water Or Detergents And Protect Them With Vaseline Oil Or Car Wax. Aluminium_Aluminium Alloys, Particularly Suitable For Cold Working And Die Casting, Appropriately Treated To Resist Atmospheric Agents And Powder Coated. To Keep The Product In Good Condition For A Long Time, We Recommend Correct Periodic Cleaning, Which Is Particularly Frequent In Locations Characterized By High Humidity And A Marine Climate. It Is Recommended To Clean The Surfaces With A Soft Cloth Using Water Or Neutral Detergents.Teak_Since It Is A Natural Material, You May Observe Variations In Color Between One Product And Another Or Between The Components Of The Same Product. Furthermore, In Case Of Sudden Changes In Temperature And Depending On The Humidity Level, Cracks May Also Occur. If Not Subjected To Any Maintenance Treatment Through The Periodic Application Of Common And Specific Oil-Based Protective Products, The Surface Will Take On A Silver Gray Patina Which Can Also Be Eliminated With Light Surface Sanding And Subsequent Polishing With A Jute Cloth. Small Surface Stains Due To Oil Or Other Food Products Must Be Removed Promptly, Before The Wood Can Absorb Them Deeply, By Sanding The Affected Surface And Polishing With A Jute Cloth. Designerandreucci & Hoislbiographya Deep Friendship And A Common Vision Of The Project, Based On The Search For The Synthesis Between Function And Form, Is The Basis Of The Collaboration Between Alessandro Andreucci (1968), Mechanical Engineer, Designer And Christian Hoisl (1961), Industrial Designer. They Have Been Working Together Since 2004 Between Italy (Carpi) And Germany (Monaco). Alessandro Andreucci Graduated In Mechanical Engineering From The University Of Bologna, With An Experimental Thesis In Biomechanics. After Graduating, He Moved To Germany, To Munich, Where He Worked, Starting As A Trainee, At The System Design Studio, Of Which Christian Hoisl Is Co-Owner. In 2000 He Returned To Italy, To Iguzzini Illuminazione, Working Mainly On Projects By Renzo Piano In Paris (Rpbw) And Ron Arad In London. In 2004 He Opened His Own Industrial Design Office. Christian Hoisl Graduated From The University Of Applied Sciences Of Industrial Design In Munich. From 1987 To 1992 He Collaborated With Herbert Schultes And Martin Dettinger On The Development Of System 25 For Bulthaup. Then, With The Studio, System Design, He Develops Kitchens, Bathrooms, Offices And Outdoor Furniture. In 2000 He Founded His Own Studio In Monaco. Lemani Casa Official Dealer